Now Serving Canada
Pharmaceutical and Medical Device Fall Protection
Fall Protection That Works Around Controlled Environments
Pharmaceutical and medical device plants put people at height to service the large air handlers on the roof, charge reactors and blenders, work on process mezzanines and reach equipment in mechanical rooms. Every one of those tasks has to fit around production schedules, controlled areas and your quality team’s approvals.
EDGE Fall Protection designs rooftop and AHU guardrail, crossover stairs, safety gates, platforms and removable railing that fit those constraints, with bolt-together options that limit on-site welding. We plan the work around your shutdowns, install with our own crews and inspect every system each year.
Where Falls Happen in Pharmaceutical and Medical Device Plants
Regulated manufacturing puts a lot of elevated work on the roof and behind the scenes. These are the hazards we are asked to guard most often.
Rooftop Air Handlers
Plant HVAC means large air handlers on the roof, serviced often and sometimes close to the edge. AHU guardrail guards the service side without blocking the panels.
Roof Edges and Service Routes
Technicians cross long roofs to reach equipment near open edges. Non-penetrating rooftop guardrail protects the route without drilling into the roof.
Pipes, Ducts and Level Changes
Ductwork and piping on the roof and in mechanical areas force workers to climb over. Crossover stairs give them a guarded step over.
Process Mezzanines
Raw materials and components land on process mezzanines at an open edge. Mezzanine safety gates guard the opening during each transfer.
Reactors, Blenders and Skids
Charging and cleaning process equipment puts operators beside open edges. Industrial platforms give them guarded footing at working height.
Equipment Changeovers
Equipment moves in and out during changeovers and expansions. Removable safety railing lifts out for the move and drops back into its brackets.
AHU and Chiller Access, Guardrail and Platform Systems
These are the systems we install most often in pharmaceutical and medical device facilities. Send us photos, layouts and any finish requirements, and we’ll recommend the right fit.
AHU & Chiller Fall Protection
Guardrail designed around the service access on a rooftop air handler or chiller sitting too close to the edge.
AccuFit Safety Railing
Architectural-grade guardrail for buildings where the roofline is visible and appearance matters as much as compliance.
360° Mobile Safety Rail
Our most versatile freestanding guardrail — weighted bases, no penetrations, and fully relocatable as your rooftop changes.
Roof Crossover Ladders
Steps up, a level landing, and steps down — safe passage over a parapet, duct run, or elevation change.
Industrial Crossover
A rated route over the pipe run or conveyor your people are currently climbing across.
Industrial Platform
A stable, guarded work surface for tank tops, hoppers, mixers, and machinery access.
Metal Stairs
Industrial stairways engineered to OSHA 1910.25 geometry, built to your rise and configuration.
Horizontal Mezzanine Safety Gate
A pivoting dual-gate system that always leaves one side of the mezzanine opening protected — with no overhead clearance required.
Vertical Mezzanine Safety Gate
A lift gate that rises clear of the opening, keeping the deck completely free for direct forklift placement.
Self-Closing Ladder Safety Gate
A spring-loaded gate at the top of a fixed ladder that closes behind the climber automatically.
AccuFit Modular Railing System
A pipe-and-fitting system that handles corners, curves, and elevation changes without custom fabrication.
Industrial Removable Safety Railing
Rail sections that lift out by hand for equipment access and reset in minutes, rated the same as fixed rail when in place.
Roof Hatch Guardrail
Fixed railing and a self-closing gate around a roof hatch, protecting the opening a worker steps out of.
Skylight Screen
The practical, cost-effective screen for protecting a standard skylight opening across a whole roof.
Nationwide OSHA Compliant Fall Protection
Why Pharmaceutical and Medical Device Manufacturers Choose EDGE
Facility, EHS and engineering teams in regulated plants need fall protection that fits their equipment, schedules and approvals.
- Rooftop and interior work for pharmaceutical manufacturers, and rooftop guardrail for medical device manufacturers
- Air-handler guardrail engineered around the unit, including toe boards and ladder access on interior units
- Bolt-together systems that limit on-site welding where that matters
- Planned around shutdowns and coordinated with your quality and EHS teams
- Engineered and stamped: EDGE calculates the loads, and a licensed professional engineer stamps the drawings after your approval
- Our own installation crews in all 50 states and Canada, with annual inspections and five-year anchorage pull tests
Our Happy Clients
We are grateful for the wonderful testimonials from our happy and beloved clients. From local businesses owners to Fortune 500 executives. You all have helped make us a force in the workplace fall protection industry!
Pharmaceutical Fall Protection FAQ
Facility managers, EHS leads and engineers in regulated plants ask these questions first. Here are straight answers.
Yes, with your quality team involved. EDGE Fall Protection makes no cleanroom or GMP compliance claims. We plan platform access and guardrail near controlled areas with your quality and EHS teams, use bolt-together systems where on-site welding is a concern, and schedule the work around shutdowns. Your quality team approves anything installed in production and controlled areas.
EDGE Fall Protection designs AHU guardrail around the specific unit, its service panels and piping, so technicians can still open panels and reach the equipment. Systems mount to the equipment pad, structural steel or freestanding ballasted bases, stay independent of the unit, and can include removable sections or self-closing gates where major components have to come out.
A mezzanine gate guards an opening where material is loaded onto a mezzanine. A horizontal mezzanine gate slides across the opening, and a vertical mezzanine gate lifts above it so a forklift can set loads on the deck. A self-closing swing gate is for people: it closes behind the worker at a ladder or stair opening. EDGE Fall Protection chooses the gate around how people and material use each opening.
Yes. EDGE Fall Protection recommends a documented inspection of every system by a competent person at least once a year, and pull tests anchorages every five years. Our in-house inspection team gives you a report for your safety and audit records after each visit.